Carpentry: hire a carpenter or find carpentry jobs
On Doings you can hire a carpenter for custom shelves, door hanging, trim installation, deck repair and other woodwork: post a task with measurements, photos and your budget, and people reply with their own price. If you are looking for carpentry jobs, the same account lets you browse open tasks and respond to the ones you can do.
In person
Hire a carpenter for shelves, doors and repairs
Describe what you want built or repaired, with measurements, photos of the place and a sketch or a picture of the result you have in mind. Say what material and finish you want and who buys the timber. People respond with their own price, and you choose after comparing profiles, reviews and examples of earlier work they show you in the chat.
Find carpenter jobs on Doings
If you work with wood and have your own tools, you can respond to carpentry tasks posted in your area. You set your own price in each response. Ask for measurements and photos before you quote, state clearly whether materials are included, and check whether the job needs a licence or permit where it will be done.
Carpentry jobs people post
- Custom shelves and built-ins. Building shelves, alcove units, a built-in wardrobe or a window seat made to fit the space.
- Door hanging. Hanging interior doors, trimming a door to fit the frame, and fitting hinges, latches and handles.
- Trim and baseboard installation. Cutting and fitting baseboards, door casings, crown moulding and window trim, with neat mitred corners.
- Deck repair. Replacing rotten or split deck boards, loose steps and handrails on a deck at ground level.
- Fence and gate repair. Replacing fence boards and rails, resetting a leaning post, and building or rehanging a wooden gate.
- Custom furniture. Making a table, a bench, a bed frame or a storage unit to your measurements and choice of wood.
- Cabinet and countertop fitting. Fitting kitchen or bathroom cabinets, adjusting doors and drawers, and cutting a wooden worktop to size.
- Floor and stair repairs. Fixing squeaky or loose floorboards, replacing damaged boards, and repairing stair treads and balusters.
How much does a carpenter charge?
Carpenters quote by the hour, by the day or as a fixed price for the finished piece. On Doings each person replies with their own price.
- Scope of the work. Hanging one door is a few hours. A wall of built-in storage is several days of measuring, cutting, fitting and finishing.
- Materials and timber grade. Softwood and sheet material cost less than hardwood. Say which you want and whether the price should include it.
- Finish. Painting, staining, oiling or varnishing adds time. A paint-ready finish costs less than a completed one.
- Design work. A made-to-measure piece needs drawings and decisions. A job with a clear plan or a standard item is quicker to price.
- Workshop or on site. Parts cut in a workshop and fitted on site are priced differently from work done entirely at your place.
- Access and condition of the site. Uneven walls and floors, tight stairs and limited working space add fitting time.
Doings does not set prices. The customer sets a budget, and people reply with their own price. A service fee applies to card tasks: an estimate of it is shown when you post the task, and the final amount depends on the price in the response you choose. Cash tasks have no service fee.
How hiring works on Doings
- Describe the task and set your budget. Posting a task costs nothing.
- People respond with their own price. Compare their profiles and reviews, and chat before you decide.
- Choose the person you want. For a card task, the price in the response you chose is charged through Stripe and kept on a payment hold. A cash task is settled directly between the two of you.
- When the job is done, confirm it and the payment is released. If the other person marks the task as ready and you give no answer for 3 days, it is released automatically.
- If the job was not done, mark the task as not completed instead of confirming. If the other person disagrees, a staff member reviews the case, and a card payment stays on hold meanwhile.
Carpentry work: what you need and how to start
- Tools. Saws, a drill and driver, a level, clamps, chisels and a sander; a workshop is not needed for on-site jobs.
- Typical tasks. Shelves, door fitting and trimming, skirting boards, built-in storage and repairs to decks and fences.
- Materials. Say in your response whether timber and fixings are included, or list them for the customer to buy.
- Limits. Structural work often needs a licensed builder and a permit; respond only to what you are entitled to do.
How to start on Doings
- Use the same account you post tasks with. There is no separate account for doing tasks.
- Before you respond to a cash task, either pass the identity review (a staff member compares a photo of your ID with a selfie) or submit your details to Stripe. To respond to a card task you need a Stripe account that Stripe has enabled; that is also how you are paid out.
- Browse open tasks and respond with your own price. Each response uses energy, an in-app allowance that refills over time.
- Chat with the customer about the details. Tasks, responses and chat are translated automatically between 10 languages.
- If you are chosen, do the job and mark it as ready. A card payment is released after the customer confirms, or automatically after 3 days without an answer; the money then appears in your Wallet, and you request a payout to the bank account registered with Stripe. A cash task is paid directly by the customer.
Licences and rules
Finish carpentry and small repairs often need no licence, but check the local rule. Structural building work, such as load-bearing walls, roof framing, new decks above ground level and extensions, often needs a licensed builder and a permit, and in some places the rule depends on the size or price of the job. Check the local requirement before work starts and ask to see the licence.
Not allowed on Doings in this service:
- Roofing and other work at dangerous heights.
- Structural demolition.
Doings does not check licences, qualifications or insurance. The person doing the work is responsible for holding whatever the local law requires, and customers should ask to see it before the job starts. Read the Community Rules
Open tasks change all the time. See what is posted right now on the task map. Browse tasks on the map
Carpentry: questions and answers
What is the difference between a carpenter and a handyman?
A carpenter specialises in building and fitting things made of wood: doors, trim, shelving, cabinets, decks and custom pieces. A handyman covers a wider range of small repairs and mounting jobs. For made-to-measure work or fine joinery choose a carpenter; for a short list of small fixes a handyman is usually enough.
How do I hire a carpenter for custom shelves?
Post a task on Doings with the width, height and depth of the space, photos, the material you want and whether the shelves should be painted. Set a budget. People respond with their own price; ask them in the chat for photos of similar work before you choose.
Do I need a permit for a deck repair?
Replacing a few boards on an existing deck usually does not need a permit. Building a new deck, changing its size or height, or replacing its structure often does, and the rules differ from place to place. Ask your local building office before the work starts.
Should I buy the wood myself or let the carpenter supply it?
Either works, so agree it before the job. A carpenter knows which grade and sizes are needed and can pick straight boards, but adds the cost to the price. If you buy the timber yourself, ask for an exact cutting list first so nothing is missing on the day.
How do I find carpentry jobs near me?
Look on the Doings task map under the Carpentry category for jobs posted around you: shelves, doors, decking and repairs. Read the measurements and the photos, ask who supplies the timber, and respond with your price to the jobs that fit your tools.
How do I get carpentry work without my own workshop?
Many carpentry tasks are done entirely on site: door hanging, trim, deck and fence repairs, fitting cabinets. Respond to those and say in your response which tools you bring and what similar jobs you have done. Leave workshop-built pieces to people who have the space and machines for them.
How do I quote a carpentry job?
Separate labour from materials. Measure, or ask for dimensions and photos, list the timber, boards and fixings the job needs, and say who buys them. Quote the labour as one price for the task as described, and state what is not included, such as painting, removing old units or taking waste away.
Related services
Last updated: