Electrical work: hire an electrician or find jobs
On Doings you can hire someone for electrical work such as installing a light fixture, a ceiling fan or an outlet, or replacing a switch: post a task with the details, photos and your budget, and people reply with their own price. If you are looking for electrician jobs, the same account lets you browse open tasks on the map and respond. Doings does not check licences, so ask to see one where the law requires it.
In person
Hire an electrician for a repair or installation
Say what you need installed, replaced or fixed, how many points there are, and whether wiring already exists at each spot. Add photos of the fitting, the ceiling or wall, and your fuse box or breaker panel, and set a budget. People respond with their own price. Ask in the chat what licence they hold before you choose.
Find electrician jobs on Doings
If you do electrical work, you can respond to electrical tasks posted in your area and set your own price in each response. Check first what the law at the place of the task requires. By responding you state that you hold every licence and permit the job needs, so do not respond to work you are not entitled to do there.
Electrical jobs people post
- Light fixture installation. Replacing a ceiling or wall light with a new fixture on existing wiring, including pendants and chandeliers.
- Ceiling fan installation. Fitting a ceiling fan in place of a light, checking that the ceiling box can carry the weight, and wiring the control.
- Outlet installation and replacement. Replacing a cracked or loose outlet, changing it to a safety or USB type, or adding a new outlet to a circuit.
- Switch replacement. Swapping a worn light switch, or fitting a dimmer, a timer or a smart switch in the same place.
- EV charger installation. Fitting a home charging point for an electric car, usually on its own circuit from the panel.
- Outdoor and garden lighting. Installing wall lights, security lights with sensors and low-voltage garden lighting outside the house.
- Finding an electrical fault. Tracing why a breaker keeps tripping, a circuit is dead or lights flicker, and repairing the cause.
- Appliance and extractor fan wiring. Connecting a hard-wired oven, hob, bathroom extractor fan or kitchen hood to an existing supply.
- Smoke alarm installation. Fitting or replacing battery or mains-powered smoke and carbon monoxide alarms.
How much does an electrician cost?
There is no single price for electrical work. People quote per hour or per job, and the figure depends on whether wiring is already in place and on what the law requires for the job. These are the things that usually change the price.
- Existing wiring or new circuit. Swapping a fitting on existing wiring is a short job. Running a new cable or adding a circuit takes much longer.
- Number of points. Several lights, switches or outlets in one visit usually cost less per point than a single one.
- Access. High ceilings, solid walls, a missing attic hatch or finished surfaces that must not be damaged all add time.
- State of the installation. Old wiring, a full panel or missing earthing can mean extra work before the new fitting can be connected safely.
- Licence, permit and inspection. Where the job legally needs a licensed electrician, a permit or a test certificate, the price includes that work.
- Fittings and materials. Say whether you have bought the light, fan, charger or outlets, or whether the person should supply them.
- Timing. Urgent, evening and weekend jobs usually cost more than a visit on a flexible date.
Doings does not set prices. The customer sets a budget, and people reply with their own price. A service fee applies to card tasks: an estimate of it is shown when you post the task, and the final amount depends on the price in the response you choose. Cash tasks have no service fee.
How hiring works on Doings
- Describe the task and set your budget. Posting a task costs nothing.
- People respond with their own price. Compare their profiles and reviews, and chat before you decide.
- Choose the person you want. For a card task, the price in the response you chose is charged through Stripe and kept on a payment hold. A cash task is settled directly between the two of you.
- When the job is done, confirm it and the payment is released. If the other person marks the task as ready and you give no answer for 3 days, it is released automatically.
- If the job was not done, mark the task as not completed instead of confirming. If the other person disagrees, a staff member reviews the case, and a card payment stays on hold meanwhile.
Electrical Work work: what you need and how to start
- Licence first. Most electrical work for payment is reserved for licence holders; by responding you state that you hold what that address requires.
- Typical tasks. Light fixtures, switches and outlets, ceiling fans, fault finding and, for licence holders, new circuits and EV chargers.
- Tools. A voltage tester and a multimeter, insulated hand tools, a drill and a stock of connectors and fixings.
- Quoting. Ask for photos of the fitting and the panel, and include any permit or inspection in your price.
How to start on Doings
- Use the same account you post tasks with. There is no separate account for doing tasks.
- Before you respond to a cash task, either pass the identity review (a staff member compares a photo of your ID with a selfie) or submit your details to Stripe. To respond to a card task you need a Stripe account that Stripe has enabled; that is also how you are paid out.
- Browse open tasks and respond with your own price. Each response uses energy, an in-app allowance that refills over time.
- Chat with the customer about the details. Tasks, responses and chat are translated automatically between 10 languages.
- If you are chosen, do the job and mark it as ready. A card payment is released after the customer confirms, or automatically after 3 days without an answer; the money then appears in your Wallet, and you request a payout to the bank account registered with Stripe. A cash task is paid directly by the customer.
Licences and rules
Many places allow only a licensed or registered electrician to do electrical work, sometimes with an exception for like-for-like replacements, and some jobs need a permit or an inspection. On Doings a person who responds to a task states that they hold whatever licence the law at that place requires. Doings does not check that statement. Ask to see the licence before work starts and check it with the body that issued it.
Not allowed on Doings in this service:
- Electrical work that the local law reserves for a licensed electrician, unless the person responding holds that licence.
- Work on the utility side of the meter, on the service cable or on overhead power lines.
- Electrical work on roofs or at other dangerous heights.
- Bypassing a meter, a breaker or any other safety device.
Doings does not check licences, qualifications or insurance. The person doing the work is responsible for holding whatever the local law requires, and customers should ask to see it before the job starts. Read the Community Rules
Open tasks change all the time. See what is posted right now on the task map. Browse tasks on the map
Electrical Work: questions and answers
How do I find an electrician near me?
Post an electrical task on Doings with a description of the job, photos and a budget. People in your area respond with their own price. Compare their profiles and reviews, ask in the chat what licence they hold, and choose the person you want. Doings shows who responds; it does not check their licences or skills.
Can a handyman change a light fixture?
It depends on the law where you live. In many places a person without an electrical licence may replace a light fixture, switch or outlet like for like on existing wiring. In others every electrical job needs a licensed electrician. New circuits, panel work and EV chargers need a licence in most places. Check your local rules first.
Do I need a permit to add an outlet?
Often yes. Adding an outlet means extending or creating a circuit, and many places require a permit and an inspection for that, while replacing an existing outlet usually does not. Your local building or electrical authority decides, so ask it before the work starts. The customer is responsible for checking whether a permit is needed.
How much does it cost to install a ceiling fan?
The price depends mostly on what is in the ceiling now. Replacing a light with a fan on existing wiring and a fan-rated box is a job of an hour or two. If the box must be changed, the ceiling is high, or new wiring and a wall control are needed, it takes longer. Put the ceiling height and photos in your task.
Can I hire someone on Doings to install an EV charger?
You can post the task, but a home EV charger normally needs its own circuit, and in most places that work is reserved for a licensed electrician and may need a permit or a notice to the power company. Say this in the task, ask each person who responds to show the licence, and check it before choosing.
Is a panel upgrade a job I can post on Doings?
Replacing or upgrading a breaker panel is licensed work in most places and usually needs a permit, an inspection and coordination with the power company. Only a person who holds the required licence may respond. Doings does not check licences, so ask for the licence number and confirm it with the issuing body yourself.
How do I find electrician jobs in my area?
Electrical tasks are on the Doings task map under the Electrical Installation category. Before you respond, check what the law at the task's address lets you do with your licence. To respond to card tasks you also need a Stripe account that Stripe has enabled.
What should I check before quoting an electrical job?
Ask for photos of the fitting, the wiring behind it if it is visible and the panel, and ask how old the installation is. Confirm who supplies the fixture and whether the circuit is already there. Check that the job is one your licence covers at that address and whether a permit or an inspection is needed, and include that in your price.
Related services
Last updated: